Shenzhen jinhongyu Industry Co., Ltd
Specializing in precision parts processing and manufacturing, fixture, smelting tool, mold, manipulator accessories, etc
0755-26740010
Your current location:Home - News - Common problem
Recommended products
How to prevent mold damage?
Time:2020-06-09 Read: 1274
With the continuous development of industry, we can know the rapid development of various industries, then when used, it may cause certain damage, it may be caused when we use it, or it may be because of processing Caused, so how to prevent mold damage? Let's take a look below!


1. Good casting structure design

The wall thickness of the casting is as uniform as possible to avoid the occurrence of thermal joints to reduce the thermal fatigue caused by the local heat concentration of the mold. There should be proper rounded corners at the corners of the casting to avoid stress caused by sharp corners on the mold.

 

2. Reasonable mold structure design

 1) The components in the mold should have sufficient rigidity and strength to withstand the pressure without deformation. The mold wall thickness must be sufficient to reduce deformation.

2) The pouring system design minimizes impact and erosion on the core.

3) Correctly select the tolerance fit and surface roughness of each component.

4) Maintain mold thermal balance.

 

3. Standard heat treatment process

Through heat treatment, the metallographic structure of the material can be changed to ensure the necessary strength, hardness, dimensional stability at high temperature, thermal fatigue resistance and material cutting performance.

 The correct heat treatment process will get the best mold performance, and the performance of the steel is controlled by the quenching temperature and time, cooling rate and tempering temperature.

Message
Focus on precision parts design, production, processing, installation and after-sales services
Service hotline:0769-81182602(808)

Contact: Miss Xia

Mobile phone: 18926579610

Phone: 0755-26740010

E-mail:senyuanmoju@126.com
URL:www.szjhysy.com
Address: 1st Floor, Building A7, Guantian Huafeng Science and Technology Park, Beihuan Road, Shiyan Street, Baoan District, Shenzhen

Copyright Shenzhen Jinhongyu Industrial Co., Ltd. © Copyright 2020 粤ICP备20028928号